Embossing entails using specially made dies to make letters stand above the surface. This process results in three-dimensional effect that is very appealing to look at. When the process is carried out using foil embossing dies, the effect is even more appealing literally and visually. This design is used whenever there is need for highlighting important information such as designs, names and logos. Two processes; die embossing and foil embossing are always combined to achieve better results.
This process is normally used in designing business cards, brochures, invitations, presentation folders, certificates, greeting cards and rack cards. Almost every element and picture of a design can be taken through the embossing process. A detailed die and paper of heavier density are the most effective in bringing out the design.
The main dies used in the embossing process are copper, brass, magnesium and scratch. Though different, they are all involved in the real process as determined by a number of factors. They paragraphs that follow explain these dies and their functions.
Magnesium foils are normally applied in stamping flat surfaces, and is designed from magnesium. This is a silvery metallic element that expands on a slight exposure to small heat. The foil is acid etched, and is very affordable compared to other dies.
Copper foils are also commonly used in this process. Copper being a harder element as contrasted to magnesium expands at a lesser rate in relation to magnesium. This type of foil is always recommended for approximately a hundred impressions. Just like the preceding metal foil, they are etched with acid, and can handle more details as contrasted to magnesium. The price is slightly higher than that of those made from magnesium. This type of die takes about three days to be ready for use.
The next type of foil is that applied on brass. They are normally used in the embossing of single level and multilevel flat foils, removing the stamps and all these activities combined. This foil is designed from the alloy of zinc and copper. Whenever it is exposed to rising temperatures, its enlargement degree is the least as contrasted to the other foils mentioned. This type is usually hand etched. Besides this, it is less affordable as compared to magnesium. Designing this foil takes a minimum of five days.
The very last die is the scratch off. It is commonly used on coated items and plastic. There are various shades of colors and designs of this category. These colors and models are employed in the same functions of stamping designs on items. The varying colors have no impact on the resultant design apart from printing out texts of different colors.
The various types of foils are, therefore, applied in this designing process. The elements looked for in selecting a suitable die includes how they respond to changes in the amount of heat, the time taken in their designing and the nature of materials they work with. All these factors are vital in printing three-dimensional letters. Selecting a good die is important in the prevention of wastage.
This process is normally used in designing business cards, brochures, invitations, presentation folders, certificates, greeting cards and rack cards. Almost every element and picture of a design can be taken through the embossing process. A detailed die and paper of heavier density are the most effective in bringing out the design.
The main dies used in the embossing process are copper, brass, magnesium and scratch. Though different, they are all involved in the real process as determined by a number of factors. They paragraphs that follow explain these dies and their functions.
Magnesium foils are normally applied in stamping flat surfaces, and is designed from magnesium. This is a silvery metallic element that expands on a slight exposure to small heat. The foil is acid etched, and is very affordable compared to other dies.
Copper foils are also commonly used in this process. Copper being a harder element as contrasted to magnesium expands at a lesser rate in relation to magnesium. This type of foil is always recommended for approximately a hundred impressions. Just like the preceding metal foil, they are etched with acid, and can handle more details as contrasted to magnesium. The price is slightly higher than that of those made from magnesium. This type of die takes about three days to be ready for use.
The next type of foil is that applied on brass. They are normally used in the embossing of single level and multilevel flat foils, removing the stamps and all these activities combined. This foil is designed from the alloy of zinc and copper. Whenever it is exposed to rising temperatures, its enlargement degree is the least as contrasted to the other foils mentioned. This type is usually hand etched. Besides this, it is less affordable as compared to magnesium. Designing this foil takes a minimum of five days.
The very last die is the scratch off. It is commonly used on coated items and plastic. There are various shades of colors and designs of this category. These colors and models are employed in the same functions of stamping designs on items. The varying colors have no impact on the resultant design apart from printing out texts of different colors.
The various types of foils are, therefore, applied in this designing process. The elements looked for in selecting a suitable die includes how they respond to changes in the amount of heat, the time taken in their designing and the nature of materials they work with. All these factors are vital in printing three-dimensional letters. Selecting a good die is important in the prevention of wastage.
0 comments:
Post a Comment